Train Stations
By using our high class LED Tubes in repair shops and train stations we can optimize and assure the safety of the passengers and staff. Energy resources will be saved and capital surpluses will give you more possibilities for other invests.
CROUS T8 LED “train” P-Type
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Specially made for railed vehicles.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | Un 0.7 – 1.25 |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS T8 LED “train” V-Type
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Specially made for railed vehicles.
Wider beam angle (>200°) for higher uniformity.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | Un 0.7 – 1.25 |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS T8 LED “train” two sided
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Specially made for railed vehicles.
Optimized for applications where light is needed in both directions 2x 120° beam angle.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | Un 0.7 – 1.25 |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED “train” SPOT I
High performance heatsink.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Different sockets and designs available, if you have special requirement please let us know.
Phase cut dimming optional possible.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 12 V AC/DC, 24 VDC, 110 VAC, 230 VAC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED “train” SPOT II
High performance heatsink.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Different sockets and designs available, if you have special requirement please let us know.
Phase cut dimming optional possible.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 12 V AC/DC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED “train” SPOT III
High performance heatsink.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Different sockets and designs available, if you have special requirement please let us know.
Phase cut dimming optional possible.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 12 V AC/DC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED MR16 “talent”
High performance heatsink.
Aluminum PCB for optimized heat transmission.
High efficiency reflector-lens for maximum output and low glare.
Different sockets and designs available, if you have special requirement please let us know.
Especially designed for Bombardier Talent 1.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 12 VDC, 24 VDC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED “train” Panel
High uniformity and low glare.
Aluminum PCB for optimized heat transmission.
Different units can be switched individually.
Especially designed for trains of ET model range of the DB.
Higher and more even illumination than with the standard T8 solution which is typical installed.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 24 VDC, 36 VDC, 72 VDC, 110 VAC, 230 VAC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED “doorstrip” IP65
LED Entrance light unit.
High performance heatsink.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
High class 5630 LED dies.
Meanwell high-class driver.
Plastic units made by acrylonitrile-butadiene-styrene (ABS resin).
High quality components to prevent corrosion.
High protection against humidity and dirt.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 12 VDC, 24 VDC, 230 VAC |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED TUBE P-Type
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
VDE certified.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 100 – 277 VAC 50/60Hz |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED TUBE V-Type
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency at minimum glare.
Wider beam angle (220°) for higher uniformity.
VDE certified.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 100 – 277 VAC 50/60Hz |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
CROUS LED TUBE H-Type
Patented 180° rotatable endcap for best results at special applications.
Aluminum PCB for optimized heat transmission.
Maximum efficiency.
Narrow beam angle (70°) for installations higher than 3m.
High brightness for selective illumination.
Application Ta 25°C
| Temperature | Humidity | ||
|---|---|---|---|
| Operation | -20~+40°C | Operation | 10% – 80% |
| Storage | -40~+85°C | Storage | 10% – 80% |
Electrical data
| Operating voltage | 100 – 277 VAC 50/60Hz |
| PF >0.93 | THD <20% |
| Energy efficiency | >0.87 |
English 
German